you can us a old tattoo power supply just find one thats rated for 15volts like one from a lava lamp or any kind of power adapter with a higher output then you will have to strip the wires and connect them though a potentiometer variable resistor so that you can control how much power gets to the tattoo gun you could get a power supply from lots of things like old internet routers a old gaming system lots of toys /
lighting and one of my favorite’s is an old style power supply with tattoo needles from and older computer if you have a old computer laying around just pull its power supply with all the power cords connected especially the power button and main cord this should work great as long as you watch which wire you connect to so all the black wires are ground and then the thicker yellow wire’s should be 12 volts and the red wire’s are all 6 volts im pretty sure and its selfe cooled with a power switch and you may even be alble to just connect it strait up to the 12 volts and get it to run but then theri is no variable speed control
and i can not guarantee it is enough amps but it should run it also it does not matter which set of power wires you use any of them that has the white clear plastic cover that you plug into any drive for power are all connected to the same power sources and you will know if you pull to much power as long as you turn on the power supply switch and wait till the colling fan is running constantly before you connect the tattoo gun
No comments:
Post a Comment