Motorcycle Inspection Conditions method

Biker tips : Motorcycle Inspection Conditions method

Tires Inspection for motorcycle

Tyres are a vital part on a motorcycle, let alone used during rainy days. To get maximum performance, tires should be treated properly.

Worn tires will lose its ability both in durability and function traksinya. We recommend that tires be replaced if the tire has been living as deep as 0.8 mm. Do not wait tire completely bald. Because we passed the standing water will flow Tires channel water towards the side of the tire. If there is no plot. Water can not be distributed towards the side of the tire as a result lifted above the water surface. This will make the motorcycle shaky. Consider the following things:

1. Use the right type of tire in accordance with the conditions of use, loading capacity and speed.

Tip: If you do replacement tires, should use the same brand and type of tires Front and rear. Different type of flower will cause the performance of different tires. How to safely use the type of tire recommended by the motorcycle manufacturer that you use because the manufacturer would have done the test with a variety of weather conditions.

2. Tire pressure must be maintained according to manufacturer specifications. Although this is very important and easy thing to do, but many users do not notice motorcycles.

Wind pressure checks on tires, should be standardized (Read the specs on the factory owners manual.) If too low pressure heavy motorcycle while driving and would easily leak because Ban The inside will rub and cause overheating. If too tight the pressure will be felt not stable in the medium and high speed because the surface of the tire that touches the road surface is too small.

3. Put Close valve, because it will prevent entry of dirt and also serves as additional insulation.

4. If you use tubeless tires (without tires), try to time replace it with a new tire, replace the nipple because the nipple also have O ring made of rubber which will change the nature of hardness and elasticity with time of use. O ring that has been used to harden will crack causing leakage.

5. It is recommended when replacing tires, tires also replaced simultaneously. Tires in the long-used, will easily leak. Especially if it is too much tambalannya.

Inspection Fuel Systems & Carburetors income

When the rains cause the air content (02) as mixing the fuel sucked by the carburetor contains a lot of water so that if conditions such as Fuel Systems Fuel Tanks, Valves, Fuel and fuel pipes are rust or water content will result in the performance of the engine stalled. It would be more troublesome in wet conditions. Coming to the Official Workshop for regular maintenance.

Checking Engine Oil.

When it rains the condition of the air which contains water and there is standing water on some roads more than 30 cm in height (the size of an adult's knee) will certainly facilitate the entry of water into the machine and mixed with oil. It was easy to detect the rider is to see whether oil change color to WHITE MILK. If yes means the water has been mixed. Immediately do the oil change if the flooding has passed the road which is quite high. This is to avoid further damage to the machine.

Air Filter Inspection.

Water can also enter through the air filter. Especially if you pass a pool of high water or flooding. If water is not too tinggipun potentially get into the machine, especially if a four-wheel drive vehicle in addition to a motorcycle or in the opposite direction. Will create a wave of water and hit the front of the motor as a result of water entering through the air filter. If the amount of water is too much to enter, will result in a more severe of Water Hammer. Water hammer is a hard blow on the engine which caused severe damage to the engine such as: crooked rod piston (Connecting Rod), etc. Broken Piston.

Braking System Inspection.

Check the functions of front and rear brakes are working, do the simulation of braking before driving a few times to make sure the function works well, besides the function deteksilah whether there squeaking sound if yes, which means that the surface was slippery Brake Lining Canvas and need treatment. If the function was less well check the thickness of the brakes by looking directly thick Pad (Disc Brakes) and see indicators of thickness on the drum type brakes. If too little soon to do the replacement in the Official Workshop.

Steering System Inspection

Lastly, check the steering system, because it needed a good stability when driving during rainy days. Besides it is difficult to predict road conditions such as holes, rocks or while avoiding other riders who suddenly quit. Ask your mechanic to check the Official Workshop. Or you can do the following tips for initial examination:

1. Position the motorcycle on Main Standard (Main Stand)

2. Hold the Front Fork (Fork Front) while squatting

But before that make sure the position of your fingers are not too close to the Disk Brake Front because it will hurt. The condition is not rocking rocking motorcycle. and make sure there are no other people nearby.

3. Push and pull towards the front and rear

4. Feel if there is looseness or not.

If there is looseness (unthight), immediately ask mechanic to tighten and check back heavy and light steering wheel movement.

tips - sugest on buying a new motorcycle

Many consument / people who buy a motorcycle does not fit its function. In buying a motorcycle, there are some things that must be known. One is the motor function, whether for daily or rarely use. What else?
Buyers also should find after-sales service, so if you purchased a motorcycle to have problems, no trouble.

Here are tips on buying a new motorcycle sugest:
1. See products direct
Seeing motor products to be purchased by going directly to the motorcycle showroom will be very good. In addition to seeing its products directly, you can also try the motor performance or comfort. Do not ever interested in the brochure, it's better to come directly and see the direct order not to be fooled by the picture.

2. After-sales service
Ask also how the after-sales facilities. Do not want to buy a motorcycle when the motorcycle you can not buy this service.

3. Do not buy because of their pride
Do not feel proud or feel part of it to buy a new motorcycle. Buying a motor in accordance with its function.

4. Expensive does not mean good
Buy expensive motor that does not mean the bike is good, a lot of expensive motor instead become junk in a corner of the house. Let me cheap if easy care and assurance of adequate spare parts would become immortal bike. Do not be easily tempted seduction SPG Motor.

5. Clay contents of our money budget
You should be able to adjust your income to the size of repayments, if you buy a motorcycle on credit.

6. Features and completeness
When buying a new motorcycle is usually the consumer will get a helmet, jacket, manual, service book, other books as the keys standard. If from one of these is not what you get, you better not buy a motorcycle because the equipment is standard equipment motor sales.

7. Guarantee
Warranty is important when buying a new motorcycle. If you need the dealer directly involving consumers to motor vehicle insurance for credit to be safe and comfortable. Minimum 2 year engine warranty bike year warranty.

SUGGEST : Guidelines to Conserve Gasoline

Guidelines to Conserve Gasoline

IN order to save on petrol which is increasingly expensive, there are only yag efforts can be made. One way is to replace the carburetor.
Although less powerful, it is said these efforts could save up to 20 percent gasoline. Another way that could be taken especially on the power car carburetor engine, usually in the carburetor there are two jet-jet is de replace with a smaller hole.
But the effect is to make the engine less powerful. Some of the tips below may be so inspired you:

Perform regular maintenance every 5000 kms. It's important to treat the parts like air filters, because the petrol will be cleaned in addition to reset the ignition of the engine. In order for fuel-efficient, then the adjustment of air and fuel mixture is homogeneous is very important.
Note the free movement of the clutch. Coupling the "nyetut" not to proceed with either engine speed. Try the machine is turned on and then input into first gear transmission. Injaklah clutch pedal to the meeting and then release. Pay attention to what distance from the floor of the car started moving. Good, about 50% of the distance that exists.
Check also the right of te wind. Also use the correct type of tire. In the sedan front tire pressure 28 psi and rear 32. Minibus front 28 and rear minimum 50-60 psi. Tire pressure situation like this could save on gasoline.
Steer the car properly because the correct driving can save up to 15 percent gasoline. Injaklah accelerator with subtle way, not "shocked, shocked." On machines that use the RPM meter, try not exceed 50 percent RPM. If a red alert at 6000 RPM, make the trip using only 3000 RPM. Or keep pace car more frequently in the 80 km / hr. At speeds above 80 km / h, transfer to over-drive gear for the car equipped with over-drive transmission.

The 10 Section on Motor To Look

10 Section on Motor To Look

Most new riders want to pay attention to the vehicle if the engine fussy, do not want to turn on or fussy. In fact, there are about 10 triggers calamity that could befall the rider and there are of them led to the accident.

Notice the sections below, may occur on your bike.
1. Spidomoter cable end
Especially when she decided the bottom. Do disepelakan and let it drop. The danger, strong twisted cord to the fingers, you have bounced straight forward.
2. Contra nut gas cables
Skubek owner who made a special unloading hooked pairs carburetor. Make sure the nut fastener counter throtle cable line pipe has been bound correctly on beretknya. If one nut loose and the pipe-shaped letter "L" off, then the gas grip aka los baseball would be played. The danger, as could be hit by a vehicle overtaking from the front or rammed from behind.
3. Bolts front sepatbor
Check the fastener bolts (4 pieces), do not let loose. When all four bolts loose and the retaining of water would fall onto the conveyor, the back sepatbor be folded in a triangle and the motor could brake suddenly, causing the back of tumbling.
4. Rubber protective bubble
battery positive part of the head covered, either from rubber, plastic or other materials that do not deliver electricity apapan. If the conditions have been damaged and have not had time to replace them, "Make sure the battery is completely tied to the house and away from the components around which could cause misunderstanding," said Wawan Setiawan, head mechanic of Yamaha Motor bloomed, Bogor.
5. Tire pressure
Do not let the wind pressure is less, can lead to leaks. Moreover, long out of use and park without using the middle standard. "If less wind, tire rub in the same vulnerable outer rim and tire. So that cause leakage even explode," said Ribut Wahyudi, mechanical Stars Jaya Niaga, Cibinong, Bogor.
6.Replace sharp sprocket
Observe eye gear teeth, both front and rear, if it has been pointed should be replaced. Because, when it is easy to move in sharp positions. Rantaipun loose and stuck in the arm. You hear of people falling from the bike because the chain broke and stuck in the arm, yes because of negligence.
7.Fuse mandatory pairs
Make sure the battery powered ampere fuse which has a size as recommended. Even the position of the fuse plug completely in place to avoid shorting.
8.Replace brake lever brake nut
If the motor has more than 5 years old, do not forget with the retaining nut, fastener as well as liaison from the rear brake lever Babet materials. Moreover, often unloading pairs, allowing screw deterioration or dol. If it were so, the brakes could be because as a liaison bablas brake lever off of the stalks.
9. Rubber damaged Footstep
When the rubber off or hanucr, then the apparent end of the iron as a basic component of the footrests. Then imagine again if the tip of the iron had touched accidentally shins.
10.Make bother for back passenger
Frequently encountered, the rear license plate was not dislodged. That's a source of bad luck if not quickly corrected. At least leg dibonceng be a victim. Especially when they want to go down.
let begin check.